TOUCH SELECT 2-4 AND HIGH-LOW SYSTEM > TERMINALS OF ECU |
| CHECK FOUR WHEEL DRIVE CONTROL ECU |

Measure the voltage and resistance according to the value(s) in the table below.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
| F47-1 (DL1) - F46-4 (GND) | LG - W-B | A.D.D. actuator limit switch | Ignition switch ON Transfer position switch H2 | Below 1.5 V |
| Ignition switch ON Transfer position switch H4 or L4 | 10 to 14 V | |||
| F47-2 (DL2) - F46-4 (GND) | GR - W-B | A.D.D. actuator limit switch | Ignition switch ON Transfer position switch H4 or L4 | Below 1.5 V |
| Ignition switch ON Transfer position switch H2 | 10 to 14 V | |||
| F47-3 (4WD) - F46-4 (GND) | B - W-B | Transfer indicator switch (for 4WD position) | Ignition switch ON Transfer position switch H2 | 10 to 14 V |
| Ignition switch ON Transfer position switch H4 or L4 | Below 1.5 V | |||
| F47-6 (TL1) - F46-4 (GND) | G - W-B | Transfer shift actuator limit switch | Ignition switch ON Transfer position switch H2 | Below 1.5 V |
| Ignition switch ON Transfer position switch H4 or L4 | 10 to 14 V | |||
| F47-7 (TL2) - F46-4 (GND) | L - W-B | Transfer shift actuator limit switch | Ignition switch ON Transfer position switch H2 or L4 | 10 to 14 V |
| Ignition switch ON Transfer position switch H4 | Below 1.5 V | |||
| F47-8 (TL3) - B-4 (GND) | R - W-B | Transfer shift actuator limit switch | Ignition switch ON Transfer position switch H2 or H4 | 10 to 14 V |
| Ignition switch ON Transfer position switch L4 | Below 1.5 V | |||
| F47-11 (2-4) - F46-4 (GND) | W - W-B | Transfer position switch | Ignition switch ON Transfer position switch H2 or H4 | Below 1.5 V |
| Ignition switch ON Transfer position switch L4 | 10 to 14 V | |||
| F47-13 (LO) - F46-4 (GND) | B - W-B | Transfer position switch | Ignition switch ON Transfer position switch H4 or L4 | Below 1.5 V |
| Ignition switch ON Transfer position switch H2 | 10 to 14 V | |||
| F47-14 (ADD) - F46-4 (GND) | W - W-B | A.D.D. detection switch | Ignition switch ON Transfer position switch H4 or L4 | Below 1.5 V |
| Ignition switch ON Transfer position switch H2 | 10 to 14 V | |||
| F47-16 (4WDL) - F46-4 (GND) | L - W-B | Transfer indicator switch (for L4 position) | Ignition switch ON Transfer position switch L4 | Below 1.5 V |
| Ignition switch ON Transfer position switch H2 or H4 | 10 to 14 V | |||
| F47-19 (CANH) - F46-4 (GND) | G - W-B | CAN communication line | Ignition switch ON | Pulse generation |
| F47-20 (CANL) - F46-4 (GND) | W - W-B | CAN communication line | Ignition switch ON | Pulse generation |
| F47-21 (L4) - F46-4 (GND) | R - W-B | Transfer L4 signal | Ignition switch ON Transfer position switch L4 | Below 1.5 V |
| Ignition switch ON Transfer position switch H2 or H4 | 10 to 14 V | |||
| F46-2 (DM1) - F46-4 (GND) | B - W-B | A.D.D. actuator motor | Ignition switch ON Transfer position switch H2 → H4, L4 (A.D.D. actuator motor stopped) | Below 1.5 V |
| Ignition switch ON Transfer position switch H2 → H4, L4 (During operation of A.D.D. actuator motor from FREE to LOCK) | 10 to 14 V | |||
| F46-3 (IG) - F46-4 (GND) | R - W-B | IG power | Ignition switch ON | 11 to 14 V |
| F46-4 (GND) - Body ground | W-B - Body ground | Ground | Always | Below 1 Ω |
| F46-6 (DM2) - F46-4 (GND) | Y - W-B | A.D.D. actuator motor | Ignition switch ON Transfer position switch H4, L4 → H2 (A.D.D. actuator motor stopped) | Below 1.5 V |
| Ignition switch ON Transfer position switch H4,L4 → H2 (During operation of A.D.D. actuator motor from LOCK to FREE) | 10 to 14 V | |||
| F46-7 (TM2) - F46-4 (GND) | V - W-B | Transfer shift actuator assembly | Ignition switch ON Transfer position switch L4 → H4 (Transfer shift actuator motor stopped) | Below 1.5 V |
| Ignition switch ON Transfer position switch L4 → H4 (During operation of transfer shift actuator motor from LOW to HIGH) | 10 to 14 V | |||
| F46-8 (TM1) - F46-4 (GND) | P - W-B | Transfer shift actuator assembly | Ignition switch ON Transfer position switch H4 → L4 (Transfer shift actuator motor stopped) | Below 1.5 V |
| Ignition switch ON Transfer position switch H4 → L4 (During operation of transfer shift actuator motor from HIGH to LOW) | 10 to 14 V |
![]() |
Using an oscilloscope, check waveform 1.
| Item | Content |
| Terminal No. (Symbols) | F47-19 (CANH) - F46-4 (GND) |
| Tool setting | 1 V/DIV., 10 μsec./DIV. |
| Condition | Engine stopped and ignition switch ON |
| *1 | Waveform 1 |
![]() |
Using an oscilloscope, check waveform 2.
| Item | Content |
| Terminal No. (Symbols) | F47-20 (CANL) - F46-4 (GND) |
| Tool setting | 1 V/DIV., 10 μsec./DIV. |
| Condition | Engine stopped and ignition switch ON |
| *1 | Waveform 2 |