Home › Audio / Visual / Telematics › AUDIO / VIDEO › MICROPHONE AMPLIFIER

MICROPHONE AMPLIFIER > INSTALLATION

for Preparation Click here



1. INSTALL AMPLIFIER MICROPHONE ASSEMBLY
  1. Connect the connector and install the amplifier microphone.



2. INSTALL TELEPHONE MICROPHONE ASSEMBLY
  1. Attach the 2 claws to install the telephone microphone.

  1. Connect the connector.

  1. Attach the 8 claws to install the inner bezel.

  1. Install the screw.

  1. Connect the 6 connectors.



3. INSTALL MAP LIGHT ASSEMBLY
  1. Connect the connector.

  1. Attach the 2 clips to install the map light assembly.

  1. Install the 2 screws.

  1. Close the cover (w/o Drive Monitor Switch).



4. INSTALL DRIVE MONITOR SWITCH
  1. Connect the connector.

  1. Attach the 4 claws to install the drive monitor switch.