MANUAL(SOS)SWITCH > INSTALLATION |
| 1. INSTALL TELEPHONE SWITCH ASSEMBLY |
Install the telephone switch with the 2 screws.
Connect the connector.
Attach the 8 claws to install the inner bezel.
Install the screw.
Connect the 6 connectors.
| 2. INSTALL MAP LIGHT ASSEMBLY |
Connect the connector.
Attach the 2 clips to install the map light assembly.
Install the 2 screws.
Close the cover (w/o Drive Monitor Switch).
| 3. INSTALL DRIVE MONITOR SWITCH |
Connect the connector.
Attach the 4 claws to install the drive monitor switch.