MICROPHONE AMPLIFIER > REMOVAL |
| 1. REMOVE DRIVE MONITOR SWITCH |
![]() |
Detach the 4 claws to remove the drive monitor switch.
Disconnect the connector.
| 2. REMOVE MAP LIGHT ASSEMBLY |
Open the cover (w/o Drive Monitor Switch).
![]() |
Remove the 2 screws.
Detach the 2 clips to remove the map light assembly.
Disconnect the connector.
| 3. REMOVE TELEPHONE MICROPHONE ASSEMBLY |
![]() |
Disconnect the 6 connectors.
![]() |
Remove the screw.
![]() |
Detach the 8 claws and remove the inner bezel.
![]() |
Disconnect the connector.
Detach the 2 claws and remove the telephone microphone.
| 4. REMOVE AMPLIFIER MICROPHONE ASSEMBLY |
![]() |
Disconnect the connector and remove the amplifier microphone.