REAR DOOR SPEAKER > INSTALLATION |
| 1. INSTALL REAR SPEAKER ASSEMBLY |
Temporarily install the speaker by attaching the 2 claws of the speaker to the door panel.
Install the speaker with the 3 screws.
Connect the connector.
| 2. INSTALL REAR DOOR INNER GLASS WEATHERSTRIP LH |
![]() |
Attach the 3 claws to install the rear door inner glass weatherstrip LH as shown in the illustration.
| 3. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY LH |
![]() |
Attach the claw to install the clamp.
![]() |
Connect the rear door lock remote control cable assembly LH and rear door inside locking cable assembly LH as shown in the illustration.
![]() |
Connect the connector.
![]() |
Attach the rear door trim board sub-assembly LH to the 4 claws of the rear door inner glass weatherstrip LH as shown in the illustration.
Attach the reference boss.
| *1 | Reference Boss |
![]() |
Attach the 9 clips to install the rear door trim board sub-assembly LH.
Install the 3 screws.
![]() |
Attach the 4 claws to install the 2 door armrest caps.
| 4. INSTALL REAR DOOR INSIDE HANDLE BEZEL LH |
![]() |
Attach the 3 claws to install the rear door inside handle bezel LH.