REAR DOOR SPEAKER > REMOVAL |
| 1. REMOVE REAR DOOR INSIDE HANDLE BEZEL LH |
![]() |
Using moulding remover, detach the 3 claws to remove the rear door inside handle bezel LH as shown in the illustration.
| *1 | Moulding Remover |
| 2. REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY LH |
![]() |
Detach the 4 claws to remove the 2 door armrest caps.
![]() |
Remove the 3 screws.
Remove the 9 clips.
![]() |
Pull out the rear door trim board sub-assembly LH in the direction indicated by the arrow as shown in the illustration.
Raise the rear door trim board sub-assembly LH and detach the 4 claws and reference boss to remove the rear door trim board sub-assembly LH together with the rear door inner glass weatherstrip LH.
| *1 | Reference Boss |
![]() |
Disconnect the connector.
![]() |
Disconnect the rear door lock remote control cable assembly LH and rear door inside locking cable assembly LH as shown in the illustration.
![]() |
Using a screwdriver, detach the claw to remove the clamp.
| 3. REMOVE REAR DOOR INNER GLASS WEATHERSTRIP LH |
![]() |
Using a screwdriver, detach the 3 claws to remove the rear door inner glass weatherstrip LH from the rear door trim board sub-assembly LH as shown in the illustration.
| 4. REMOVE REAR SPEAKER ASSEMBLY |
![]() |
Disconnect the speaker connector.
Remove the 3 screws.
Detach the 2 claws and remove the speaker.