Home › Vehicle Interior › DOOR LOCK › DOOR CONTROL TRANSMITTER (w/ Smart Key System)

DOOR CONTROL TRANSMITTER (w/ Smart Key System) > REMOVAL

for Preparation Click here


NOTICE:
Take extra care when handling these precision electronic components.



1. REMOVE TRANSMITTER BATTERY


    B208996
  1. Push the release hook knob and extract the emergency key.



    B208997
  1. Insert a precision screwdriver into the gap and turn the screwdriver to detach the transmitter housing cover.

    HINT:
    Tape the screwdriver tip before use.



    B107853
  1. Remove the battery (lithium battery: CR1632).

    NOTICE:
    1. Do not push the terminals with your finger.
    2. Do not forcibly pry up the battery. The terminals may be damaged.
    3. Do not touch the battery with wet hands. Water may cause rust.
    4. Do not touch or move any components inside the transmitter. It may interfere with proper operation.