FRONT BUMPER > REMOVAL |
| 1. REMOVE UPPER RADIATOR SUPPORT SEAL |
Remove the 13 clips and upper radiator support seal.
| 2. REMOVE FRONT BUMPER COVER |
Put protective tape around the front bumper cover.
Remove the 3 bolts, 10 screws and 6 clips.
Detach the 14 claws to remove the front bumper cover with radiator grille.

| *1 | Protective Tape | - | - |
Disconnect the 2 connectors.
| 3. REMOVE UPPER CENTER FRONT BUMPER RETAINER |
![]() |
Remove the 3 bolts, 2 screws and upper front bumper retainer.
![]() | Bolt |
![]() | Screw |
| 4. REMOVE FRONT BUMPER LOWER COVER |
![]() |
Remove the clip, 5 bolts and front lower bumper cover.
| 5. REMOVE RADIATOR SIDE DEFLECTOR LH |
![]() |
Using a clip remover, detach the 3 claws and remove the clip. Then move the radiator side deflector LH so that the radiator can be removed in the step below.
| 6. REMOVE RADIATOR SIDE DEFLECTOR RH |
![]() |
Using a clip remover, detach the 3 claws and remove the clip. Then move the radiator side deflector RH so that the radiator can be removed in the step below.
| 7. REMOVE FRONT BUMPER ENERGY ABSORBER |
![]() |
Remove the front bumper energy absorber.
| 8. REMOVE FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY |
![]() |
Remove the 6 nuts, screw and front bumper reinforcement sub-assembly.
| 9. REMOVE NO. 2 FRONT BUMPER EXTENSION SUB-ASSEMBLY LH |
![]() |
Remove the 4 bolts and No. 2 front bumper extension sub-assembly LH.
| 10. REMOVE NO. 2 FRONT BUMPER EXTENSION SUB-ASSEMBLY RH |
| 11. REMOVE FRONT BUMPER SIDE SUPPORT LH |
![]() |
Remove the bolt and screw.
Detach the 2 claws to remove the front bumper side support LH.
| 12. REMOVE FRONT BUMPER SIDE SUPPORT RH |
| 13. REMOVE FRONT BUMPER BRACKET SUB-ASSEMBLY LH |
![]() |
Remove the 2 bolts and front bumper bracket sub-assembly LH.
| 14. REMOVE FRONT BUMPER BRACKET SUB-ASSEMBLY RH |