Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › FRONT BUMPER (w/ Intuitive Parking Assist System)

FRONT BUMPER (w/ Intuitive Parking Assist System) > REMOVAL

for Preparation Click here



1. REMOVE UPPER RADIATOR SUPPORT SEAL
  1. Remove the 13 clips and upper radiator support seal.



2. REMOVE FRONT BUMPER COVER
  1. Put protective tape around the front bumper cover.

  1. Remove the 3 bolts, 10 screws and 6 clips.



  1. Detach the 14 claws to remove the front bumper cover with radiator grille.


    B353221E01


    Text in Illustration 
    *1
    Protective Tape
    -
    -

  1. Disconnect 3 connectors.



3. REMOVE UPPER CENTER FRONT BUMPER RETAINER


    A311025
  1. Remove the 3 bolts, 2 screws and upper front bumper retainer.
    Text in Illustration 
    V100135
    Bolt
    V100136
    Screw



4. REMOVE COOL AIR INTAKE DUCT (for 4WD)


    B353485
  1. Remove the 4 clips and cool air intake duct.



5. REMOVE FRONT BUMPER LOWER COVER


    B354478
  1. Remove the clip.

  1. Remove the 4 bolts and front lower bumper cover.



6. REMOVE AIR INTAKE DUCT LH


    B353484
  1. Remove the clip and bolt.

  1. Remove the 2 screws and air intake duct LH.



7. REMOVE AIR INTAKE DUCT RH

HINT:
Use the same procedure as for the LH side.



8. REMOVE RADIATOR SIDE DEFLECTOR LH


    A311027
  1. Using a clip remover, detach the 3 claws and remove the clip. Then move the radiator side deflector LH so that the radiator can be removed in the step below.



9. REMOVE RADIATOR SIDE DEFLECTOR RH


    A311026
  1. Using a clip remover, detach the 3 claws and remove the clip. Then move the radiator side deflector RH so that the radiator can be removed in the step below.



10. REMOVE FRONT BUMPER ENERGY ABSORBER


    B353202
  1. Remove the front bumper energy absorber.



11. REMOVE FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY


    B354481
  1. Remove the screw, 6 nuts and front bumper reinforcement sub-assembly.



12. REMOVE NO. 2 FRONT BUMPER EXTENSION SUB-ASSEMBLY LH


    B239394
  1. Remove the 4 bolts and No. 2 front bumper extension sub-assembly LH.



13. REMOVE NO. 2 FRONT BUMPER EXTENSION SUB-ASSEMBLY RH

HINT:
Use the same procedure as for the LH side.



14. REMOVE FRONT BUMPER SIDE SUPPORT LH


    B353205
  1. Remove the bolt and screw.

  1. Detach the 2 claws to remove the front bumper side support LH.



15. REMOVE FRONT BUMPER SIDE SUPPORT RH

HINT:
Use the same procedure as for the LH side.



16. REMOVE FRONT BUMPER BRACKET SUB-ASSEMBLY LH


    B353207
  1. Remove the 2 bolts and front bumper bracket sub-assembly LH.



17. REMOVE FRONT BUMPER BRACKET SUB-ASSEMBLY RH

HINT:
Use the same procedure as for the LH side.