REAR BUMPER (w/ Intuitive Parking Assist System) > INSTALLATION |
| 1. INSTALL PINTLE HOOK SUPPORT TUBE SUB-ASSEMBLY (w/ Pintle Hook) |
Install the pintle hook support tube sub-assembly with the 6 bolts.
| 2. INSTALL REAR BUMPER UPPER RETAINER LH |
Attach the 2 clips to install the rear bumper upper retainer LH.
| 3. INSTALL REAR BUMPER UPPER RETAINER RH |
| 4. INSTALL REAR COMBINATION LIGHT LENS AND BODY LH |
Attach the 2 clips and 3 guides to install the rear combination light lens and body LH.
Install the 2 nuts.
Connect the connector.
Install the cover.
| 5. INSTALL REAR COMBINATION LIGHT LENS AND BODY RH |
| 6. INSTALL REAR BUMPER SIDE SUPPORT LH |
Attach the 5 claws to install the rear bumper side support LH.
Install the 3 screws.
| 7. INSTALL REAR BUMPER SIDE SUPPORT RH |
| 8. INSTALL REAR BUMPER BAR REINFORCEMENT LH |
Install the rear bumper bar reinforcement LH with the 2 bolts.
| 9. INSTALL REAR BUMPER BAR REINFORCEMENT RH |
| 10. INSTALL REAR BUMPER ENERGY ABSORBER |
Install the rear bumper energy absorber.
| 11. INSTALL REAR BUMPER COVER |
Connect the connector.
Attach the 18 claws to install the rear bumper cover.
Install the 8 bolts and 4 screws.
| 12. INSTALL REAR QUARTER PANEL MUDGUARD LH |
Install the rear quarter panel mudguard LH with the 4 screws and 4 clips.
| 13. INSTALL REAR QUARTER PANEL MUDGUARD RH |
| 14. INSTALL JACK BOX HOLE COVER |
Attach the 2 guides and 2 claws to install the jack box hole cover.