Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR BUMPER

REAR BUMPER > REMOVAL

for Preparation Click here



1. REMOVE JACK BOX HOLE COVER


    B239891E01
  1. Put protective around the jack box hole cover.

  1. Using a moulding remover, Detach the 2 claws and 2 guides and remove the jack box hole cover.
    Text in Illustration 
    *1
    Protective Tape
    *2
    Moulding Remover



2. REMOVE REAR QUARTER PANEL MUDGUARD LH


B353243
  1. Remove the 3 clips, 5 screws and rear quarter panel mudguard LH.



3. REMOVE REAR QUARTER PANEL MUDGUARD RH

HINT:
Use the same procedure as for the LH side.



4. REMOVE REAR BUMPER COVER


  1. Remove the 2 bolts and 2 screws.


    B353488



  1. Put protective tape around the rear bumper cover.


    B353489E01


    Text in Illustration 
    *1
    Protective Tape
    -
    -

  1. Remove the 2 screws and 6 bolts.

  1. Detach the 18 claws to remove the rear bumper cover.



5. REMOVE REAR BUMPER ENERGY ABSORBER


    B239893
  1. Remove the rear bumper energy absorber.



6. REMOVE REAR BUMPER BAR REINFORCEMENT LH


    B239881
  1. Remove the 3 bolts and rear bumper bar reinforcement LH.



7. REMOVE REAR BUMPER BAR REINFORCEMENT RH

HINT:
Use the same procedure as for the LH side.



8. REMOVE REAR BUMPER SIDE SUPPORT LH


    B239954
  1. Remove the 3 screws.

  1. Detach the 5 claws to remove the rear bumper side support LH.



9. REMOVE REAR BUMPER SIDE SUPPORT RH

HINT:
Use the same procedure as for the LH side.



10. REMOVE REAR COMBINATION LIGHT LENS AND BODY LH


    E280422
  1. Remove the cover.

  1. Remove the 2 nuts.

  1. Detach the 2 clips and 3 guides to remove the rear combination light lens and body LH.

  1. Disconnect the connector.



11. REMOVE REAR COMBINATION LIGHT LENS AND BODY RH

HINT:
Use the same procedure as for the LH side.



12. REMOVE REAR BUMPER UPPER RETAINER LH


    B239955
  1. Detach the 2 clips to remove the rear bumper upper retainer LH.



13. REMOVE REAR BUMPER UPPER RETAINER RH

HINT:
Use the same procedure as for the LH side.



14. REMOVE PINTLE HOOK SUPPORT TUBE SUB-ASSEMBLY (w/ Pintle Hook)


    B353232
  1. Remove the 6 bolts and pintle hook support tube sub-assembly.