STEERING PAD > ON-VEHICLE INSPECTION |
| 1. CHECK STEERING PAD (VEHICLE NOT INVOLVED IN COLLISION) |
Perform a diagnostic system check (Click here).
With the steering pad installed on the vehicle, perform a visual check. If there are any defects as mentioned below, replace the steering pad with a new one:
Cuts, minute cracks or marked discoloration on the steering pad top surface or in the grooved portion.
| 2. CHECK STEERING PAD (VEHICLE INVOLVED IN COLLISION AND AIRBAG HAS NOT DEPLOYED) |
Perform a diagnostic system check (Click here).
With the steering pad removed from the vehicle, perform a visual check. If there are any defects as mentioned below, replace the steering pad or steering wheel with a new one: