KINETIC DYNAMIC SUSPENSION SYSTEM > PRECAUTION |
| 1.KINETIC DYNAMIC SUSPENSION SYSTEM |
Before removing, installing and disassembling hydraulic circuit parts, clean each part to prevent mud and dirt from entering the hydraulic circuit.
Always drain fluid from the bleeder plug of the stabilizer control with accumulator housing assembly to reduce pressure before removing parts, as the fluid is sealed under high pressure in the hydraulic circuit.
Protect the removed/disassembled parts with plastic bags to prevent foreign matter from adhering to or entering them, and store them in a safe place.
Be careful when removing, installing and disassembling the hydraulic circuit related parts, such as bleeder plugs and tube flare nuts, as fluid may leak when the parts are damaged.
| 2.IGNITION SWITCH EXPRESSION |
| Expression | Ignition Switch (position) | Engine Switch (condition) |
| Ignition Switch off | Off | Off |
| Ignition Switch ON | ON | On (IG) |
| Ignition Switch ACC | ACC | On (ACC) |
| Engine Start | START | Start |