BACK DOOR LOCK > INSTALLATION |
| 1. INSTALL BACK DOOR LOCK ASSEMBLY |
![]() |
Install the back door lock assembly with the 3 bolts.
Connect the connector.
![]() |
Attach the 2 clamps and claw.
| 2. INSTALL NO. 2 BACK DOOR SERVICE HOLE COVER |
Apply butyl tape to the back door panel.
![]() |
Install a new No. 2 back door service hole cover.
| *1 | Reference Point |
Attach the No. 2 back door service hole cover according to the reference points on the back door panel.
| 3. INSTALL MULTIPLEX NETWORK DOOR ECU |
![]() |
Attach the 2 clips to install the multiplex network door ECU to the door panel.
![]() |
Install the 3 screws.
![]() |
Connect the 3 connectors and attach the 2 clamps.
| 4. INSTALL BACK DOOR TRIM PANEL ASSEMBLY |
![]() |
Attach the 12 clips to install the back door trim panel assembly.
| 5. INSTALL ASSIST STRAP ASSEMBLY |
![]() |
Install the assist strap assembly with the bolt.
| 6. INSTALL ASSIST STRAP HOLE COVER |
![]() |
Attach the guide and 2 claws to install the assist strap hole cover.
| 7. INSTALL BACK DOOR LOCK PROTECTOR SUB-ASSEMBLY |
![]() |
Attach the 2 claws to install the back door lock protector sub-assembly.