TRANSMITTER BATTERY (w/ Smart Key System) > REPLACEMENT |
| 1. REMOVE TRANSMITTER BATTERY |
![]() |
Push the release hook knob and extract the emergency key.
![]() |
Insert a precision screwdriver into the gap and turn the screwdriver to detach the transmitter housing cover.
![]() |
Remove the battery (lithium battery: CR1632).
| 2. INSTALL TRANSMITTER BATTERY |
![]() |
Install a new battery (lithium battery: CR1632) with the positive (+) side facing upward as shown in the illustration.
Install the transmitter housing cover.
Insert the emergency key into the transmitter.
Press one of the transmitter switches and check that the LED illuminates.