OUTER REAR VIEW MIRROR > DISASSEMBLY |
| 1. REMOVE OUTER MIRROR LH |
Put protective tape around the outer mirror LH.
![]() |
Using a moulding remover, detach the 2 claws of the outer mirror LH as shown in the illustration.
| *1 | Moulding Remover |
| *2 | Protective Tape |
![]() |
Using a moulding remover, detach the 2 claws of the outer mirror LH as shown in the illustration.
| *1 | Moulding Remover |
| *2 | Protective Tape |
![]() |
Disconnect the connector and remove the outer mirror LH.
| 2. REMOVE OUTER MIRROR HOLE COVER LH |
![]() |
Detach the 5 claws to remove the outer mirror hole cover LH.
| 3. REMOVE OUTER MIRROR COVER LH |
![]() |
Detach the 7 claws to remove the outer mirror cover LH.
| 4. REMOVE SIDE TURN SIGNAL LIGHT ASSEMBLY LH (w/ Side Turn Signal Light) |
Retract the outer rear view mirror assembly LH.
![]() |
Remove the 2 screws.
Detach the 4 claws.
![]() |
Turn the socket in the direction indicated by the arrow to remove the body cover.
![]() |
Detach the 2 claws.
Disconnect the connector and remove the side turn signal light assembly LH.
| 5. REMOVE OUTER MIRROR LIGHT ASSEMBLY BULB (w/ Side Turn Signal Light) |
![]() |
Remove the outer mirror light assembly bulb.