Home › Vehicle Exterior › MIRROR (EXT) › OUTER REAR VIEW MIRROR

OUTER REAR VIEW MIRROR > REASSEMBLY

for Preparation Click here


HINT:
  1. Use the same procedure for both the RH and LH sides.
  2. The procedure listed below is for the LH side.



1. INSTALL OUTER MIRROR LIGHT ASSEMBLY BULB (w/ Side Turn Signal Light)
  1. Install the outer mirror light assembly bulb.



2. INSTALL SIDE TURN SIGNAL LIGHT ASSEMBLY LH (w/ Side Turn Signal Light)
  1. Connect the connector.

  1. Attach the 2 claws to install the side turn signal light assembly LH.

  1. Retract the outer rear view mirror assembly LH.



    E280438
  1. Turn the socket in the direction indicated by the arrow to install it.

  1. Attach the 4 claws to install the body cover.

  1. Install the 2 screws.



3. INSTALL OUTER MIRROR COVER LH
  1. Attach the 7 claws to install the outer mirror cover LH.



4. INSTALL OUTER MIRROR HOLE COVER LH
  1. Attach the 5 claws to install the outer mirror hole cover LH.



5. INSTALL OUTER MIRROR LH
  1. Connect the connector.

  1. Attach the 4 claws to install the outer mirror LH.