AIR CONDITIONING UNIT > DISASSEMBLY |
| 1. REMOVE BLOWER ASSEMBLY |
![]() |
Remove the bolt.
Detach the 2 claws and remove the blower unit assembly.
| 2. REMOVE DEFROSTER NOZZLE ASSEMBLY |
![]() |
Detach the 6 claws and remove the defroster nozzle assembly.
| 3. REMOVE ASPIRATOR HOSE |
![]() |
Detach the 2 claws and remove the aspirator hose.
| 4. REMOVE DRAIN COOLER HOSE |
![]() |
Remove the drain cooler hose.
| 5. REMOVE QUICK HEATER ASSEMBLY (w/ PTC Heater) |
![]() |
Detach the 2 clamps.
Remove the 2 screws and quick heater.
| 6. REMOVE HEATER RADIATOR UNIT SUB-ASSEMBLY |
![]() |
Remove the 2 screws and 2 radiator brackets.
Remove the radiator.
| 7. REMOVE AIR CONDITIONING HARNESS |
Disconnect the connectors.
Detach the clamps and remove the harness.

| 8. REMOVE AIR CONDITIONING TUBE AND ACCESSORY ASSEMBLY |
![]() |
Remove the packing.
![]() |
Remove the butyl tape.
![]() |
Using a 4 mm hexagon wrench, remove the 2 hexagon bolts and the air conditioner tube and accessory assembly.
Remove the 2 O-rings from the air conditioning tube and accessory assembly.
| 9. REMOVE COOLER EXPANSION VALVE |
![]() |
Remove the cooler expansion valve.
| 10. REMOVE DAMPER SERVO SUB-ASSEMBLY LH |
![]() |
Remove the 4 screws and damper servo sub-assembly LH.
| 11. REMOVE DAMPER SERVO SUB-ASSEMBLY RH |
![]() |
Remove the 3 screws and damper servo sub-assembly RH.
| 12. REMOVE NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY |
![]() |
Remove the 6 screws.
Detach the 4 claws and remove the unit case.
![]() |
Remove the evaporator.
Remove the 2 O-rings from the evaporator.
| 13. REMOVE NO. 1 COOLER THERMISTOR |
![]() |
Remove the thermistor.