Home › Vehicle Interior › HEATING / AIR CONDITIONING › FRONT EVAPORATOR TEMPERATURE SENSOR

FRONT EVAPORATOR TEMPERATURE SENSOR > DISASSEMBLY

for Preparation Click here



1. REMOVE BLOWER ASSEMBLY


    E197388
  1. Remove the screw.

  1. Detach the 2 claws and remove the blower unit assembly.



2. REMOVE DEFROSTER NOZZLE ASSEMBLY


    E197822
  1. Detach the 6 claws and remove the defroster nozzle assembly.



3. REMOVE ASPIRATOR HOSE


    E197389
  1. Detach the 2 claws and remove the aspirator hose.



4. REMOVE DRAIN COOLER HOSE


    E197396
  1. Remove the drain cooler hose.



5. REMOVE QUICK HEATER ASSEMBLY (w/ PTC Heater)


    E198797
  1. Detach the 2 clamps.

  1. Remove the 2 screws and quick heater.



6. REMOVE HEATER RADIATOR UNIT SUB-ASSEMBLY


E197390
  1. Remove the 2 screws and 2 radiator brackets.

  1. Remove the radiator.



7. REMOVE AIR CONDITIONING HARNESS



E199404

  1. Disconnect the connectors.

  1. Detach the clamps and remove the harness.



8. REMOVE AIR CONDITIONING TUBE AND ACCESSORY ASSEMBLY


    E197397
  1. Remove the packing.



    E197398
  1. Remove the butyl tape.



    E197399
  1. Using a 4 mm hexagon wrench, remove the 2 hexagon bolts and the, air conditioning tube and accessory assembly.

  1. Remove the 2 O-rings from the air conditioning tube and accessory assembly.



9. REMOVE COOLER EXPANSION VALVE


    E197400
  1. Remove the expansion valve.



10. REMOVE DAMPER SERVO SUB-ASSEMBLY LH


    E197391
  1. Remove the 4 screws and damper servo sub-assembly.



11. REMOVE DAMPER SERVO SUB-ASSEMBLY RH


E197394
  1. Remove the 3 screws and damper servo sub-assembly.



12. REMOVE NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY


    E197401
  1. Remove the 6 screws.

  1. Detach the 4 claws and remove the unit case.



    E197402
  1. Remove the evaporator.

  1. Remove the 2 O-rings from the evaporator.



13. REMOVE NO. 1 COOLER THERMISTOR


    E197774
  1. Remove the sensor.