Home › Vehicle Interior › DOOR LOCK › DOOR CONTROL SWITCH

DOOR CONTROL SWITCH > INSTALLATION

for Preparation Click here



1. INSTALL DOOR CONTROL SWITCH ASSEMBLY


    B237406
  1. Attach the 2 claws to install the door control switch assembly.

  1. Connect the door control switch connector.



2. INSTALL FRONT DOOR INNER GLASS WEATHERSTRIP RH


    B246549
  1. Install the front door inner glass weatherstrip RH.



3. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY RH


    B247530
  1. Connect the front door lock remote control cable assembly and front door inside locking cable assembly.



    B246545
  1. Connect the connector.



    B246548
  1. Attach the front door trim board sub-assembly to the 4 claws of the front door inner glass as shown in the illustration.

  1. Attach the 11 clips to install the front door trim board sub-assembly RH.

  1. Install the 3 screws.

  1. Attach the 4 claws to install the 2 door armrest caps.



4. INSTALL DOOR NO. 2 INSIDE HANDLE BEZEL RH
  1. Attach the 3 claws to install the No.2 inside handle bezel RH.



5. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH RH
  1. Attach the 2 clips to install the front door lower frame bracket garnish RH.