Home › Vehicle Interior › DOOR LOCK › DOOR CONTROL SWITCH

DOOR CONTROL SWITCH > REMOVAL

for Preparation Click here



1. REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH RH


    B246540
  1. Detach the 2 clips and remove the front door lower frame bracket garnish RH.



2. REMOVE DOOR NO. 2 INSIDE HANDLE BEZEL RH


    B246541
  1. Using a moulding remover, detach the 3 claws and remove the No.2 inside handle bezel RH as shown in the illustration.



3. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY RH


    B246542
  1. Detach the 4 claws and 2 door armrest caps.



    B246543
  1. Remove the 3 screws.

  1. Detach the 11 clips.



    B246544E01
  1. Pull out the front door trim board sub-assembly RH in the direction indicated by the arrow as shown in the illustration.
    Text in Illustration 
    *1
    Reference Boss

  1. Raise the front door trim board sub-assembly RH to detach the 4 claws and remove the front door trim board sub-assembly RH together with the front door inner glass weatherstrip RH.



    B246545
  1. Disconnect the connector.



    B246546
  1. Disconnect the front door lock remote control cable assembly and front door inside locking cable assembly.



4. REMOVE FRONT DOOR INNER GLASS WEATHERSTRIP RH


    B246547
  1. Using a screwdriver, detach the 4 claws and remove the front door inner glass weatherstrip RH from the front door trim board sub-assembly RH as shown in the illustration.



5. REMOVE DOOR CONTROL SWITCH ASSEMBLY


    B237406
  1. Disconnect the door control switch connector.

  1. Detach the 2 claws and remove the door control switch assembly.