Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION ANTENNA

NAVIGATION ANTENNA > INSPECTION

for Preparation Click here



1. INSPECT NAVIGATION ANTENNA ASSEMBLY


    E179011E05
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - Shield
    Always
    50 to 500 Ω

    If the result is not as specified, replace the navigation antenna assembly.
    Text in Illustration 
    *1
    Shield
    *a
    Component without harness connected
    (Navigation Antenna Assembly)