DIFFERENTIAL OIL > REPLACEMENT |
| 1. INSPECT DIFFERENTIAL OIL LEVEL |
Stop the vehicle on a level surface.
Remove the differential filler plug and gasket.
![]() |
Check that the oil level is within 0 to 5 mm (0 to 0.197 in.) of the bottom of the filler plug opening.
Install a new gasket and differential filler plug.
| 2. DRAIN DIFFERENTIAL OIL |
Stop the vehicle on a level surface.
Remove the differential drain plug and gasket.
Drain the oil.
Install a new gasket and the differential drain plug.
| 3. ADD DIFFERENTIAL OIL |
Remove the differential filler plug and gasket.
![]() |
Pour oil into the rear differential carrier assembly so that the oil level is within 0 to 5 mm (0 to 0.197 in.) of the bottom of the filler plug opening.
| Differential Type | Oil Type and Viscosity | Specified Condition |
| Standard | Toyota Genuine Differential gear oil LT 75W-85 GL-5 or equivalent | 1.35 to 1.45 liters (1.43 to 1.53 US qts, 1.18 to 1.27 Imp. qts.) |
| w/ A.D.D. (Automatic Disconnecting Differential) | 1.50 to 1.60 liters (1.59 to 1.69 US qts, 1.32 to 1.40 Imp. qts.) |
| Differential Type | Oil Type and Viscosity | Specified Condition |
| Standard | Toyota Genuine Differential gear oil LT 75W-85 GL-5 or equivalent | 2.65 to 2.75 liters (2.80 to 2.91 US qts, 2.33 to 2.42 Imp. qts.) |
| w/ Differential Lock | Toyota Genuine Differential gear oil LT 75W-85 GL-5 or equivalent | 2.60 to 2.70 liters (2.75 to 2.85 US qts, 2.29 to 2.38 Imp. qts.) |
Install a new gasket and the differential filler plug.
Drive the vehicle and check the oil level again.
If necessary, add differential oil.