Home › Drivetrain ยท AXLE AND DIFFERENTIAL › REAR DIFFERENTIAL LOCK CONTROL SWITCH

REAR DIFFERENTIAL LOCK CONTROL SWITCH > REMOVAL

for Preparation Click here



1. REMOVE MAP LIGHT ASSEMBLY


    C216443
  1. Remove the screws.

  1. Detach the 2 clips and remove the map light assembly.



2. REMOVE DIFFERENTIAL LOCK SWITCH


    C219435
  1. Disconnect the differential lock switch connector.



    C219436
  1. Using a screwdriver, detach the 2 claws and remove the differential lock switch from the map light assembly.

    HINT:
    Tape the screwdriver tip before use.