Home › Drivetrain · AXLE AND DIFFERENTIAL › REAR DIFFERENTIAL LOCK CONTROL SWITCH

REAR DIFFERENTIAL LOCK CONTROL SWITCH > INSPECTION

for Preparation Click here



1. INSPECT DIFFERENTIAL LOCK SWITCH


C172874E05
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Switch Condition
    Specified Condition
    1 (E) - 4 (B)
    Pressed
    Below 1 Ω
    Not pressed
    100 kΩ or higher

    Text in Illustration 
    *a
    Component without harness connected
    (Differential Lock Switch)
    If the result is not as specified, replace the differential lock switch.