Home › Vehicle Exterior › LIGHTING (EXT) › HEADLIGHT DIMMER SWITCH

HEADLIGHT DIMMER SWITCH > REMOVAL

for Preparation Click here



1. REMOVE SPIRAL CABLE SUB-ASSEMBLY
  1. Remove the spiral cable sub-assembly (Click here).



2. REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY


    E199013
  1. Disconnect the 2 connectors.

  1. Detach the claw and remove the windshield wiper switch assembly.



3. REMOVE HEADLIGHT DIMMER SWITCH ASSEMBLY


    E199215
  1. Disconnect the connector.



    E177501
  1. While loosening the band clamp as shown in the illustration, detach the claw to remove the headlight dimmer switch.

    NOTICE:
    If the claw is pressed forcefully, it will break.