Components
| Function
|
Seat slide motor
| Receives a signal from the front power seat switch and slides the seat forward and rearward.
|
Seat reclining motor
| Receives a signal from the front power seat switch and reclines and returns the seatback.
|
Seat front vertical motor
| Receives a signal from the front power seat switch and raises and lowers the front of the seat cushion.
|
Seat lifter motor
| Receives a signal from the front power seat switch and raises and lowers the seat cushion.
|
Lumbar support motor
| Receives a signal from the power seat switch assembly and adjusts the lumbar support adjuster.
|
Seat position sensor
| Is built into each power seat motor and sends position data to the front power seat switch LH so that the ECU can detect the seat position at all times.
|
Front power seat switch
| Based on the switches operated, seat adjuster signals are input into the front power seat switch LH and the seat is adjusted accordingly (for driver side). Directly sends seat adjuster signals to each power seat motor (for passenger side).
|
Power seat switch assembly
| Directly sends seat adjuster signals to the lumbar support motor.
|
Seat memory switch
| When the SET switch and memory switch are pressed simultaneously, a signal is input to the main body ECU (multiplex network body ECU) and the seat position is recorded. Then, when the memory switch is pressed, a signal is input to the main body ECU (Multiplex Network Body ECU) and the seat position changes according to memory.
|