Home › Vehicle Exterior › LIGHTING (EXT) › REAR COMBINATION LIGHT ASSEMBLY

REAR COMBINATION LIGHT ASSEMBLY > REMOVAL

for Preparation Click here


HINT:
  1. Use the same procedure for both the RH and LH sides.
  2. The procedure listed below is for the LH side.



1. REMOVE REAR COMBINATION LIGHT LENS AND BODY LH


    E280422
  1. Remove the cover.

  1. Remove the 2 nuts.

  1. Detach the 2 clips and 3 guides to remove the rear combination light lens and body LH.

  1. Disconnect the connector.