Home › Vehicle Exterior › LIGHTING (EXT) › LICENSE PLATE LIGHT ASSEMBLY

LICENSE PLATE LIGHT ASSEMBLY > INSTALLATION

for Preparation Click here



1. INSTALL LICENSE PLATE LIGHT BULB
  1. Install the bulb.



2. INSTALL LICENSE PLATE LIGHT LENS GASKET
  1. Install a new gasket.



3. INSTALL LICENSE PLATE LIGHT LENS
  1. Install the lens.



4. INSTALL LICENSE PLATE LIGHT ASSEMBLY
  1. Install the light with the 4 screws.



5. INSTALL OUTSIDE BACK DOOR GARNISH
  1. Install the outside back door garnish (Click here).