Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM

DTC    U0073    Sending Malfunction (Navigation to APGS)

DTC    U0140    Lost Communication with Body Control Module

for Preparation Click here


DESCRIPTION

These DTCs are stored when a malfunction occurs in the CAN communication circuit.

DTC No.
DTC Detection Condition
Trouble Area
U0073
CAN reception error
CAN communication system
U0140
CAN reception error
CAN communication system

INSPECTION PROCEDURE

1.CHECK DTC
  1. Clear the DTCs (Click here).

  1. Recheck for DTCs and check if the same DTCs are output again.

    OK:
    No DTCs are output.



NG
GO TO CAN COMMUNICATION SYSTEM (Click here)
OK

USE SIMULATION METHOD TO CHECK (Click here)