DOOR COURTESY LIGHT (for Front Door) > INSTALLATION |
| 1. INSTALL COURTESY LIGHT ASSEMBLY |
Install the bulb.
Connect the connector.
Attach the 2 claws to install the light.
| 2. INSTALL FRONT DOOR GLASS WEATHERSTRIP INNER LH |
![]() |
Attach the 4 claws to install the front door inner glass weatherstrip LH as shown in the illustration.
| 3. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH |
![]() |
Connect the front door lock remote control cable assembly LH and front door inside locking cable assembly LH.
![]() |
Connect the connector.
![]() |
Attach the front door trim board sub-assembly LH to the 4 claws of the front door inner glass weatherstrip LH as shown in the illustration.
Attach the reference boss.
| *1 | Reference Boss |
![]() |
Attach the 11 clips to install the front door trim board sub-assembly LH.
Install the 3 screws.
![]() |
Attach the 4 claws to install the 2 door armrest caps.
| 4. INSTALL NO. 2 DOOR INSIDE HANDLE BEZEL LH |
![]() |
Attach the 3 claws to install the No. 2 door inside handle bezel LH.
| 5. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH LH |
![]() |
Attach the 2 clips to install the front door lower frame bracket garnish LH.