Home › Vehicle Interior › LIGHTING (INT) › PERSONAL LIGHT (for Front Door)

PERSONAL LIGHT (for Front Door) > INSPECTION

for Preparation Click here



1. INSPECT NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY


    E177527E01
  1. Apply battery voltage to the connector and check the LED illumination.

    OK:
    Measurement Condition
    Specified Condition
    Battery positive (+) → Terminal 2 (+B)
    Battery negative (-) → Terminal 1 (GND)
    LED illuminates

    If the result is not as specified, replace the No. 1 interior illumination light assembly.
    Text in Illustration 
    *a
    Component without harness connected
    (No. 1 Interior Illumination Light Assembly)