TRANSPONDER KEY AMPLIFIER > INSTALLATION |
| 1. INSTALL TRANSPONDER KEY AMPLIFIER |
![]() |
Connect the connector.
Turn the key amplifier as shown in the illustration to attach the 2 claws and install the key amplifier.
Install the cover with the screw.
| 2. INSTALL UPPER STEERING COLUMN COVER |
Attach the claw to install the steering column upper cover.
Attach the 4 clips to install the steering column upper cover to the instrument cluster finish panel.
| 3. INSTALL LOWER STEERING COLUMN COVER |
Attach the 2 claws to install the steering column lower cover.
Install the 2 screws.
| 4. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY |
Attach the 7 clips to install the instrument cluster finish panel sub-assembly.
| 5. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY |
Connect each connector and hood lock control cable assembly.
Attach the 13 clips and 2 guides to install the lower instrument panel finish panel sub-assembly.
Install the 2 bolts <C>.
Attach the 2 claws to close the cover.
| 6. INSTALL NO. 2 SWITCH HOLE BASE |
Connect each connector.
Attach the 6 clips and 2 guides to install the No. 2 switch hole base.