ROOM LIGHT (for Front) > REMOVAL |
| 1. REMOVE DRIVE MONITOR SWITCH (w/ Drive Monitor Switch) |
![]() |
Detach the 4 claws to remove the drive monitor switch.
Disconnect the connector.
| 2. REMOVE MAP LIGHT ASSEMBLY |
Open the cover (w/o Drive Monitor Switch).
![]() |
Remove the 2 screws.
Detach the 2 clips to remove the map light assembly.
Disconnect the connector.
| 3. REMOVE MAP LIGHT BULB |
![]() |
Turn the 2 sockets in the direction indicated by the arrows to remove them.
Remove the 2 map light bulbs from the sockets.