Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › FRONT PASSENGER AIRBAG ASSEMBLY

FRONT PASSENGER AIRBAG ASSEMBLY > ON-VEHICLE INSPECTION

for Preparation Click here



1. CHECK INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY (VEHICLE NOT INVOLVED IN COLLISION)
  1. Perform a diagnostic system check (Click here).

  1. With the instrument panel passenger airbag installed on the vehicle, perform a visual check. If there are any defects as mentioned below, replace the instrument panel passenger airbag with a new one:
    Cuts, minute cracks or marked discoloration on the instrument panel passenger airbag.



2. CHECK INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY (VEHICLE INVOLVED IN COLLISION AND AIRBAG HAS NOT DEPLOYED)
  1. Perform a diagnostic system check (Click here).

  1. With the instrument panel passenger airbag removed from the vehicle, perform a visual check. If there are any defects as mentioned below, replace the instrument panel passenger airbag with a new one:

    1. Cuts, minute cracks or marked discoloration on the instrument panel passenger airbag.
    2. Cracks or other damage to the connector.
    3. Deformation or cracks in the instrument panel reinforcement.

    CAUTION:
    For removal and installation of the instrument panel passenger airbag, be sure to follow the correct procedure.