Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › CENTER AIRBAG SENSOR ASSEMBLY

CENTER AIRBAG SENSOR ASSEMBLY > ON-VEHICLE INSPECTION

for Preparation Click here



1. CHECK AIRBAG SENSOR ASSEMBLY (VEHICLE NOT INVOLVED IN COLLISION)
  1. Perform a diagnostic system check (Click here).



2. CHECK AIRBAG SENSOR ASSEMBLY (VEHICLE INVOLVED IN COLLISION AND AIRBAG HAS NOT DEPLOYED)
  1. Perform a diagnostic system check (Click here).



3. CHECK AIRBAG SENSOR ASSEMBLY (VEHICLE INVOLVED IN COLLISION AND AIRBAG HAS DEPLOYED)
  1. Replace the airbag sensor.

    CAUTION:
    For removal and installation of the airbag sensor, be sure to follow the correct procedure.

    HINT:
    The airbag sensor should be replaced after any of the airbags has deployed, as it has been subjected to an impact.