SIDE AIRBAG SENSOR > ON-VEHICLE INSPECTION |
| 1. CHECK SIDE AIRBAG SENSOR ASSEMBLY LH (VEHICLE NOT INVOLVED IN COLLISION) |
Perform a diagnostic system check (Click here).
| 2. CHECK SIDE AIRBAG SENSOR ASSEMBLY LH (VEHICLE INVOLVED IN COLLISION AND AIRBAG HAS NOT DEPLOYED) |
Perform a diagnostic system check (Click here).
When the center pillar of the vehicle or the surrounding area is damaged, check if there is any damage to the side airbag sensor. If there are any defects as mentioned below, replace the side airbag sensor with a new one:
| 3. CHECK SIDE AIRBAG SENSOR ASSEMBLY LH (VEHICLE INVOLVED IN COLLISION AND AIRBAG HAS DEPLOYED) |
When airbags have deployed as the result of a collision, be certain to replace all side airbag sensors in the damaged area (anywhere in need of repair).
Furthermore, it is also necessary to replace any side airbag sensors in undamaged areas that have registered a major collision, or which exhibit any of the following abnormalities: