Home › Engine / Hybrid System › 1GR-FE EMISSION CONTROL › AIR SWITCHING VALVE (for Bank 2)

AIR SWITCHING VALVE (for Bank 2) > REMOVAL

for Preparation Click here



1. REMOVE NO. 2 AIR TUBE


    A288449
  1. Remove the 2 bolts, 2 nuts and No. 2 air tube.

  1. Remove the 2 gaskets from the No. 2 air tube.

    NOTICE:
    Be careful not to damage the installation surfaces of the gaskets.



2. REMOVE NO. 2 EMISSION CONTROL VALVE SET


    A288450
  1. Disconnect the No. 2 emission control valve set connector.

  1. Disconnect the No. 3 air hose.



    A288451
  1. Remove the 3 nuts and No. 2 emission control valve set.