Home › Vehicle Interior › DOOR LOCK › POWER DOOR LOCK CONTROL SYSTEM

POWER DOOR LOCK CONTROL SYSTEM > INITIALIZATION

for Preparation Click here



PROCEDURES NECESSARY WHEN CABLE IS DISCONNECTED/RECONNECTED TO BATTERY TERMINAL

NOTICE:
  1. After the battery is reconnected, be sure to wait 10 seconds or more before attempting to start the engine. The engine may not start immediately after the battery is reconnected.
  2. If the necessary procedure is not performed, the back door cannot be opened or closed.

  1. Perform an unlock operation with the door control switch of the multiplex network master switch with the back door closed.