Home › Engine / Hybrid System › 1GR-FE FUEL › FUEL PUMP ECU

FUEL PUMP ECU > INSTALLATION

for Preparation Click here



1. INSTALL FUEL PUMP CONTROL ECU
  1. Install the fuel pump control ECU and ECU bracket to the fuel pump control ECU bracket with the 4 screws.

    Torque:
    3.0 N*m{ 31 kgf*cm , 27 in.*lbf }



2. INSTALL FUEL PUMP CONTROL ECU WITH BRACKET


    A288582
  1. Install the fuel pump control ECU with bracket with the 2 bolts.

    Torque:
    31 N*m{ 316 kgf*cm , 23 ft.*lbf }

    NOTICE:
    Do not use the fuel pump control ECU assembly if it has been subjected to physical shocks, such as being dropped, etc.

  1. Connect the connector and turn the lever to lock the connector as shown in the illustration.