Home › Engine / Hybrid System › 1GR-FE FUEL › FUEL PUMP ECU

FUEL PUMP ECU > REMOVAL

for Preparation Click here



1. REMOVE FUEL PUMP CONTROL ECU WITH BRACKET


    A288457E01
  1. Using a screwdriver, disengage the claw in the connector as shown in the illustration.

    HINT:
    Tape the screwdriver tip before use.

    Text in Illustration 
    *1
    Claw
    *2
    Lever
    *3
    Protective Tape

  1. Turn the lever as shown in the illustration and disconnect the connector.

  1. Remove the 2 bolts and fuel pump control ECU with bracket.

    NOTICE:
    Make sure the fuel pump control ECU assembly is not subjected to physical shocks, such as being dropped, etc.



2. REMOVE FUEL PUMP CONTROL ECU


    A289616
  1. Remove the 4 screws, fuel pump control ECU and ECU bracket from the fuel pump control ECU bracket.