POWER OUTLET SOCKET (for Front) > INSTALLATION |
| 1. INSTALL POWER OUTLET SOCKET COVER |
Attach the 2 claws to install the socket cover.
| 2. INSTALL POWER OUTLET SOCKET ASSEMBLY |
Attach the claw to install the power outlet socket assembly.
| 3. INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (w/o Climate Control Seat System) |
Connect 2 connectors.
Attach the 4 clips to install the lower center instrument cluster finish panel sub-assembly.
Install the 2 screws <B>.
| 4. INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (w/ Climate Control Seat System) |
Connect 3 connectors.
Attach the 4 clips to install the lower center instrument cluster finish panel sub-assembly.
Install the 2 screws <B>.
| 5. INSTALL NO. 2 CONSOLE BOX RETAINER |
Attach the clip, 2 claws and 2 guides to install the No. 2 console box retainer.
| 6. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY |
Connect each connector.
Attach the 10 clips to install the upper console panel sub-assembly.

| *A | for VF2A | *B | for VF2BM, VF4BM |
| *C | for 2WD | - | - |
| 7. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY |
![]() |
Install the shift lever knob sub-assembly and turn it in the direction indicated by the arrow.
| 8. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for VF2A) |
![]() |
Install the shift lever knob sub-assembly and turn it in the direction indicated by the arrow.
| 9. INSTALL HEATER CONTROL ASSEMBLY |
![]() |
Attach the 4 clips to install the heater control assembly.
| 10. INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH |
Attach the 5 clips to install the No. 2 instrument cluster finish panel garnish.
| 11. INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH |
Attach the 5 clips to install the No. 1 instrument cluster finish panel garnish.