REAR POWER OUTLET SOCKET > REMOVAL |
| 1. REMOVE POWER OUTLET SOCKET BEZEL (w/o Smart Key System) |
![]() |
Put protective tape around the power outlet socket bezel.
| *1 | Protective Tape |
Using a moulding remover, detach the 8 claws and remove the bezel.
![]() |
Disconnect the connector.
| 2. REMOVE REAR POWER POINT SOCKET ASSEMBLY (w/o Smart Key System) |
![]() |
Using a screwdriver, detach the claw and remove the power point socket.
| *1 | Protective Tape |
| 3. REMOVE REAR POWER POINT SOCKET COVER (w/o Smart Key System) |
![]() |
Detach the 2 claws and remove the socket cover.
| 4. REMOVE POWER OUTLET SOCKET BEZEL (w/ Smart Key System) |
![]() |
Put protective tape around the power outlet socket bezel.
| *1 | Protective Tape |
Using a moulding remover, detach the 8 claws and remove the bezel.
![]() |
Disconnect the 2 connectors.
| 5. REMOVE POWER OUTLET SOCKET (w/ Smart Key System) |
![]() |
Detach the 2 claws and remove the socket.
| 6. REMOVE REAR POWER POINT SOCKET ASSEMBLY (w/ Smart Key System) |
![]() |
Using a screwdriver, detach the claw and remove the power point socket.
| *1 | Protective Tape |
| 7. REMOVE REAR POWER POINT SOCKET COVER (w/ Smart Key System) |
![]() |
Detach the 2 claws and remove the socket cover.