Home › Vehicle Interior › POWER OUTLETS (INT) › CENTER POWER OUTLET SOCKET

CENTER POWER OUTLET SOCKET > INSTALLATION

for Preparation Click here



1. INSTALL CENTER POWER OUTLET SOCKET COVER
  1. Attach the 2 claws to install the center power outlet socket cover.

    HINT:
    Use the same procedure as for the other sides.



2. INSTALL NO. 3 POWER OUTLET SOCKET ASSEMBLY
  1. Attach the claw to install the No. 3 power outlet socket assembly.

  1. Attach the connector clamp.

    HINT:
    Use the same procedure as for the other sides.



3. INSTALL REAR CONSOLE END PANEL
  1. Connect the 2 power outlet socket assembly connectors.

  1. Attach the 4 clips and 4 claws to install the rear console end panel.



4. INSTALL NO. 1 POWER OUTLET SOCKET COVER
  1. Attach the 2 claws to install the No. 1 power outlet socket cover.



5. INSTALL NO. 1 POWER OUTLET SOCKET ASSEMBLY
  1. Attach the claw to install the No. 1 power outlet socket assembly.

  1. Connect the No. 1 power outlet socket assembly connector.



6. INSTALL REAR CONSOLE BOX ASSEMBLY
  1. Connect each connector.

  1. Attach the 2 guides.

  1. Install the rear console box assembly with the 4 bolts and 2 screws.



7. INSTALL NO. 2 CONSOLE BOX RETAINER
  1. Attach the clip, 2 claws and 2 guides to install the No. 2 console box retainer.



8. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY
  1. Connect each connector.



  1. Attach the 10 clips to install the upper console panel sub-assembly.


    B354448E01


    Text in Illustration 
    *A
    for VF2A
    *B
    for VF2BM, VF4BM
    *C
    for 2WD
    -
    -



9. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for VF2A)


    B353462
  1. Install the shift lever knob sub-assembly and turn it in the direction indicated by the arrow.



10. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY


    B353463
  1. Install the shift lever knob sub-assembly and turn it in the direction indicated by the arrow.



11. INSTALL FRONT NO. 2 CONSOLE BOX INSERT
  1. Attach the 2 clips and guide to install the front No. 2 console box insert.



12. INSTALL FRONT NO. 1 CONSOLE BOX INSERT
  1. Attach the 2 clips and 2 guides to install the front No. 1 console box insert.



13. INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH
  1. Attach the 5 clips to install the No. 2 instrument cluster finish panel garnish.



14. INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH
  1. Attach the 5 clips to install the No. 1 instrument cluster finish panel garnish.