FRONT SEAT ASSEMBLY (for Manual Seat) > REASSEMBLY |
| 1. INSTALL FRONT SEAT SIDE AIRBAG ASSEMBLY |
Using an E10 "TORX" socket wrench, install the front seat side airbag assembly with 2 new nuts.
Attach the 2 clamps to connect the front seat side airbag wire harness.
| 2. INSTALL SEPARATE TYPE FRONT SEATBACK COVER |
![]() |
Using hog ring pliers, install the separate type front seatback cover to the separate type front seatback pad with 13 new hog rings.
| *1 | Hog Ring Pliers |
![]() |
Connect the seatback cover bracket to the separate type front seatback pad.
| 3. INSTALL SEATBACK COVER WITH PAD |
Install the seatback cover with pad to the separate type front seatback spring assembly.
Attach the 4 claws to install the 2 front seat headrest supports.
Attach the 2 hooks and connect the seatback cover bracket to the separate type front seatback spring assembly with the nut.
![]() |
Close the 2 fasteners and separate type front seatback cover.
![]() |
Using hog ring pliers, install new 3 hog rings.
| *1 | Hog Ring Pliers |
| 4. INSTALL RECLINING ADJUSTER INSIDE COVER LH |
![]() |
Move the reclining adjuster inside cover LH in the direction of the arrow to install the reclining adjuster inside cover LH.
Attach the guide.
| 5. INSTALL RECLINING ADJUSTER INSIDE COVER RH |
| 6. INSTALL FRONT SEAT WIRE RH |
Install the front seat wire RH.
| 7. INSTALL OCCUPANT CLASSIFICATION ECU |
Attach the claw to install the occupant classification ECU.
Connect the 2 connectors.
| 8. INSTALL FRONT SEAT CUSHION EDGE PROTECTOR RH |
![]() |
Move the front seat cushion edge protector RH in the direction of the arrow to attach the hook and install the front seat cushion edge protector RH.
Install the screw.
| 9. INSTALL FRONT SEAT CUSHION EDGE PROTECTOR LH |
| 10. INSTALL RECLINING ADJUSTER INSIDE COVER RH |
Attach the claw and guide to install the reclining adjuster inside cover RH.
| 11. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER |
![]() |
Using hog ring pliers, install the separate type front seat cushion cover to the separate type front seat cushion pad with 15 new hog rings.
| *1 | Hog Ring Pliers |
| 12. INSTALL SEAT CUSHION COVER WITH PAD |
Attach each hook to install the seat cushion cover with pad to the separate type front seat cushion spring assembly.
| 13. INSTALL FRONT SEAT LEG COVER RH |
![]() |
Move the front seat leg cover RH in the direction of the arrow to install the front seat leg cover RH.
Attach the 2 claws.
| 14. INSTALL SEAT TRACK ADJUSTING HANDLE |
Engage the 2 springs to install the seat track adjusting handle to the separate type front seat cushion spring assembly.
| 15. INSTALL SEPARATE TYPE FRONT SEATBACK ASSEMBLY |
Install the separate type front seatback assembly with the 4 bolts.
Attach the fastening tape to connect the airbag wire harness.
Attach the 3 airbag wire harness clamps.
Attach the claw to connect the airbag connector.
Attach the 2 hooks.
Install the 2 clips.
Install the rubber band to the separate type front seat cushion spring assembly.
| 16. INSTALL FRONT SEAT INNER BELT ASSEMBLY RH |
![]() |
Install the front seat inner belt with the nut.
| *a | Protruding Part |
for Driver Side:
Connect the connector and attach the 4 clamps.
for Passenger Side:
Connect the connector and attach the clamp.
| 17. INSTALL FRONT SEAT INNER CUSHION SHIELD RH |
Attach the 4 claws to install the front seat inner cushion shield RH.
| 18. INSTALL FRONT SEAT CUSHION SHIELD RH |
Attach the 4 claws and clip to install the front seat cushion shield RH.
Install the screw.
| 19. INSTALL RECLINING ADJUSTER RELEASE HANDLE RH |
![]() |
Attach the claw to install the reclining adjuster release handle RH.
| 20. INSTALL SEAT ADJUSTER COVER CAP |
Install the 2 seat adjuster cover caps.