POWER SEAT SWITCH > INSTALLATION |
| 1. INSTALL FRONT POWER SEAT SWITCH LH |
Connect the power seat switch connector.
Install the power seat switch with the 3 screws.
| 2. INSTALL FRONT SEAT CUSHION SHIELD LH |
Attach the 3 wire harness clamps and connect the seat wire connector.

Attach the 3 claws to close the wire harness cover.
Connect the lifter motor connector.
Remove the clip attached to the separate type front seatback spring assembly and install it to the front seat cushion shield LH.
Attach the 2 clips, 3 claws and guide.
Attach the guide of the front seat No. 1 inner cushion shield LH and install the screw.
| 3. INSTALL RECLINING POWER SEAT SWITCH KNOB |
![]() |
Attach the 2 claws to install the reclining power seat switch knob.
| 4. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB |
![]() |
Attach the 2 claws to install the slide and vertical power seat switch knob.
| 5. INSTALL FRONT SEAT ASSEMBLY |
Install the front seat assembly (Click here).