REAR NO. 1 SEAT ASSEMBLY (for 60/40 Split Double-folding Seat Type LH Side) > DISASSEMBLY |
| 1. REMOVE REAR SEAT CUSHION |
![]() |
Remove the 2 screws and 2 cushions.
| 2. REMOVE REAR SEATBACK PROTECTOR |
![]() |
Remove the 2 screws.
Detach the 2 hooks and remove the protector.
| 3. REMOVE REAR SEAT CUSHION UNDER COVER LH |
![]() |
Using a moulding remover, detach the hooks and remove the cover.
| 4. REMOVE SEAT CUSHION COVER WITH PAD |
![]() |
Disconnect the seat cushion band from the seat cushion cover.
Detach the hooks and remove the seat cushion cover with pad.
| 5. REMOVE NO. 1 SEAT CUSHION COVER LH |
![]() |
Cut off the tack pins and remove the protector from the cushion pad.
| *1 | Tack Pin |
| 6. REMOVE SEPARATE TYPE REAR SEAT CUSHION COVER LH |
![]() |
Remove the hog rings and seat cushion cover from the seat cushion pad.
| 7. REMOVE REAR SEAT CUSHION BAND |
![]() |
Remove the band as shown in the illustration.
| 8. REMOVE REAR SEAT LEG BRACKET COVER |
![]() |
Using a moulding remover, detach the 4 claws and remove the cover.
| 9. REMOVE REAR SEAT LEG COVER |
![]() |
Detach the claw and guide, and then remove the cover.
| 10. REMOVE REAR NO. 1 SEAT INNER BELT ASSEMBLY LH |
![]() |
Remove the bolt and inner belt.
| 11. REMOVE REAR SEAT INNER RECLINING COVER LH |
![]() |
Remove the screw.
Detach the claw and guide, and then remove the cover.
| 12. REMOVE REAR SEATBACK LOCK COVER LH |
![]() |
Remove the 2 screws.
Detach the 2 guides and remove the cover.
| 13. REMOVE REAR SEATBACK LOCK ASSEMBLY LH |
![]() |
Remove the 2 hog rings.
![]() |
Remove the 2 bolts.
While moving the release button in the direction of the arrow in the illustration, detach it from the grommet and remove the seatback lock.
| 14. REMOVE REAR SEATBACK LOCK RELEASE BUTTON |
![]() |
Remove the release button as shown in the illustration.
![]() | Counterclockwise |
| 15. REMOVE REAR SEATBACK STOP BUTTON GROMMET |
![]() |
Detach the 3 claws and remove the grommet.
| 16. REMOVE REAR NO. 1 SEAT HEADREST SUPPORT ASSEMBLY |
![]() |
Detach the 4 claws and remove the 2 supports.
| 17. REMOVE SEATBACK COVER WITH PAD |
![]() |
Remove the hog rings and detach the hook, and then remove the seatback cover with pad.
| *1 | Hook |
| *2 | Hog Ring |
| 18. REMOVE SEPARATE TYPE REAR SEATBACK COVER LH |
![]() |
Remove the hog rings and cover from the seatback pad.
| 19. REMOVE REAR SEATBACK EDGE PROTECTOR |
Remove the protector from the seatback frame.
| 20. REMOVE REAR NO. 1 SEAT PROTECTOR |
![]() |
Detach the claw and remove the protector.
| 21. REMOVE REAR NO. 1 SEAT PROTECTOR LH |
![]() |
Detach the claw and remove the protector.