Home › Vehicle Interior › SEAT › REAR NO. 1 SEAT ASSEMBLY (for 60/40 Split Double-folding Seat Type LH Side)

REAR NO. 1 SEAT ASSEMBLY (for 60/40 Split Double-folding Seat Type LH Side) > REASSEMBLY

for Preparation Click here


CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.



1. INSTALL REAR NO. 1 SEAT PROTECTOR LH
  1. Attach the claw to install the protector.



2. INSTALL REAR NO. 1 SEAT PROTECTOR
  1. Attach the claw to install the protector.



3. INSTALL REAR SEATBACK EDGE PROTECTOR
  1. Install the protector to the seatback frame.



4. INSTALL SEPARATE TYPE REAR SEATBACK COVER LH


B238016E01
  1. Using hog ring pliers, install the seatback cover to the seatback pad with new hog rings.
    Text in Illustration 
    *1
    Hog Ring Pliers

    NOTICE:
    1. Be careful not to damage the cover.
    2. When installing the hog rings, avoid wrinkling the cover.



5. INSTALL SEATBACK COVER WITH PAD


B238013E01
  1. Attach the hook.
    Text in Illustration 
    *1
    Hog Ring Pliers
    *2
    Hook
    *3
    Hog Ring

  1. Using hog ring pliers, install the seatback cover with pad with new hog rings.



6. INSTALL REAR NO. 1 SEAT HEADREST SUPPORT ASSEMBLY
  1. Attach the 4 claws to install the 2 supports.



7. INSTALL REAR SEATBACK STOP BUTTON GROMMET
  1. Attach the 3 claws to install the grommet.



8. INSTALL REAR SEATBACK LOCK RELEASE BUTTON


B238010
  1. Install the release button as shown in the illustration.
    Text in Illustration 
    V100135
    Clockwise



9. INSTALL REAR SEATBACK LOCK ASSEMBLY LH


B238008
  1. While moving the release button in the direction of the arrow in the illustration, attach it to the grommet.

  1. Install the seatback lock with the 2 bolts.

    Torque:
    21 N*m{ 214 kgf*cm , 15 ft.*lbf }



    B239591E01
  1. Using hog ring pliers, install 2 new hog rings.
    Text in Illustration 
    *1
    Hog Ring Pliers



10. INSTALL REAR SEATBACK LOCK COVER LH


B238005
  1. Attach the 2 hooks to install the cover.

  1. Install the 2 screws.



11. INSTALL REAR SEAT INNER RECLINING COVER LH


B238002
  1. Attach the guide and claw to install the cover.

  1. Install the screw.



12. INSTALL REAR NO. 1 SEAT INNER BELT ASSEMBLY LH
  1. Install the inner belt with the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }



13. INSTALL REAR SEAT LEG COVER


B237997
  1. Attach the guide and claw to install the cover.

    HINT:
    Use the same procedure for both covers.



14. INSTALL REAR SEAT LEG BRACKET COVER


B237995
  1. Attach the 4 claws to install the cover.

    HINT:
    Use the same procedure for both covers.



15. INSTALL REAR SEAT CUSHION BAND


B237992
  1. Install the band as shown in the illustration.



16. INSTALL SEPARATE TYPE REAR SEAT CUSHION COVER LH


B238000E01
  1. Using hog ring pliers, install the seat cushion cover to the seat cushion pad with new hog rings.
    Text in Illustration 
    *1
    Hog Ring Pliers

    NOTICE:
    1. Be careful not to damage the cover.
    2. When installing the hog rings, avoid wrinkling the cover.



17. INSTALL NO. 1 SEAT CUSHION COVER LH
  1. Install the cover to the seat cushion pad with new tack pins.



18. INSTALL SEAT CUSHION COVER WITH PAD


B237991
  1. Attach the hooks to install the seat cushion cover with pad.

  1. Connect the seat cushion band to the seat cushion cover.



19. INSTALL REAR SEAT CUSHION UNDER COVER LH


B237989
  1. Attach the hooks to install the cover.



20. INSTALL REAR SEATBACK PROTECTOR
  1. Attach the 2 hooks to install the protector.

  1. Install the 2 screws.



21. INSTALL REAR SEAT CUSHION
  1. Install the 2 cushions with the 2 screws.