Home › Vehicle Interior › SEAT › REAR NO. 1 SEAT ASSEMBLY (for 60/40 Split Double-folding Seat Type RH Side)

REAR NO. 1 SEAT ASSEMBLY (for 60/40 Split Double-folding Seat Type RH Side) > REMOVAL

for Preparation Click here


CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.



1. REMOVE REAR SEAT CUSHION HINGE COVER


B238036
  1. Using a moulding remover, detach the 3 claws and remove the cover.



2. REMOVE REAR SEAT CUSHION HINGE COVER RH


B238037
  1. Using a moulding remover, detach the 3 claws and remove the cover.



3. REMOVE REAR SEAT CUSHION ASSEMBLY RH


B238038
  1. Pull the rear seat cushion band and release the lock.

  1. Remove the 2 bolts and seat cushion.

    NOTICE:
    Be careful not to damage the vehicle body.



4. REMOVE REAR SEAT HEADREST ASSEMBLY
  1. Remove the headrest.



5. REMOVE REAR SEATBACK COVER
  1. Press the seatback lock release button to release the lock and fold down the seatback.



    B237641
  1. Using a screwdriver, detach the 4 claws and remove the cover.

    HINT:
    Tape the screwdriver tip before use.



6. REMOVE REAR SEATBACK BOARD CARPET ASSEMBLY RH


  1. for Plastic Seatback Board:



      B238039
    1. Detach the 5 claws and 2 clips, and then remove the carpet.



    2. B238040
    3. Using a clip remover, detach the 4 clips and remove the carpet.



    B238017
  1. for Seatback Board with Carpet:

    1. Using a clip remover, detach the 5 clips.

    2. Detach the 2 claws and remove the carpet.



7. REMOVE REAR SEATBACK ASSEMBLY RH


B238088
  1. Remove the bolt and detach the 2 claws, and then disconnect the outer belt.

  1. Remove the 2 bolts that secure the seatback to the floor.

  1. Fold down the seatback, remove the bolt from the hinge, and then remove the seatback.

    NOTICE:
    Be careful not to damage the vehicle body.



8. REMOVE REAR SEATBACK HINGE SUB-ASSEMBLY RH


B238018
  1. Remove the bolt and hinge.



9. REMOVE REAR SEATBACK LOCK CONTROL LEVER BASE RH


B238019
  1. Using a moulding remover, detach the 6 claws.

  1. Move the cover in the direction of the arrow to detach the 2 guides and remove the lever base.



    B238021
  1. Detach the cable clamp and disconnect the cable.



10. REMOVE REAR DOOR SCUFF PLATE RH
  1. Put protective tape around the rear door scuff plate LH.



    B240011E02
  1. Using a screwdriver, detach the 3 clips, 6 claws and 2 guides to remove the rear door scuff plate LH.
    Text in Illustration 
    *1
    Protective Tape

    HINT:
    Tape the screwdriver tip before use.



11. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH


    B240009
  1. Remove the rear door opening trim weatherstrip LH.



12. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM COVER (w/o Deck Board)


    B240044
  1. Detach the 4 claws to open the cover.



    B240045E01
  1. Remove the bolt, luggage hold belt striker and No. 1 luggage compartment trim cover.
    Text in Illustration 
    *1
    Luggage Hold Belt Striker

    HINT:
    Use the same procedure for the other No. 1 luggage compartment trim cover.



13. REMOVE NO. 1 DECK BOARD SUB-ASSEMBLY (w/o Deck Board)


    B240046
  1. Detach the clip to remove the No. 1 deck board sub-assembly.



14. REMOVE NO. 2 LUGGAGE COMPARTMENT TRIM COVER (w/ Deck Board, w/o Rear No. 2 Seat)


    B240048
  1. Detach the 2 claws to open the cover.



    B240049E01
  1. Remove the bolt, luggage hold belt striker and No. 2 luggage compartment trim cover.
    Text in Illustration 
    *1
    Luggage Hold Belt Striker

    HINT:
    Use the same procedure for the other No. 2 luggage compartment trim cover.



15. REMOVE NO. 2 DECK BOARD SUB-ASSEMBLY (w/ Deck Board)


    B240064
  1. Detach the 2 clips and 2 guides to remove the No. 2 deck board sub-assembly.



16. REMOVE REAR NO. 2 FLOOR BOARD ASSEMBLY (w/ Deck Board)


    B240065
  1. Detach the 3 clips to remove the rear No. 2 floor board assembly.



17. REMOVE LUGGAGE COMPARTMENT SIDE COVER SUB-ASSEMBLY LH (w/ Deck Board)


    B240062E01
  1. Using a screwdriver, detach the 4 clips and 2 guides to remove the luggage compartment side cover sub-assembly LH.
    Text in Illustration 
    *1
    Protective Tape

    HINT:
    Tape the screwdriver tip before use.



18. REMOVE LUGGAGE COMPARTMENT SIDE COVER SUB-ASSEMBLY RH (w/ Deck Board)

HINT:
Use the same procedure as for the LH side.



19. REMOVE DECK BOARD ASSEMBLY (w/ Deck Board)


    B353466
  1. Remove the 6 bolts.

  1. Detach the 2 guides to remove the deck board assembly.



20. REMOVE INNER FLOOR SIDE RAIL SUB-ASSEMBLY


    B353467
  1. Remove the 4 bolts and inner floor side rail sub-assembly.



21. REMOVE REAR FLOOR MAT REAR SUPPORT PLATE


    B240050
  1. Detach the 5 clips to remove the rear floor mat rear support plate.



22. REMOVE REAR FLOOR CARPET ASSEMBLY (w/o Deck Board)


    B240047
  1. Detach the 4 claws to remove the rear floor carpet assembly.



23. REMOVE REAR NO. 1 SEAT OUTER LAP BELT ANCHOR COVER


    B240053
  1. Detach the 3 claws to remove the rear No. 1 seat outer lap belt anchor cover.

    HINT:
    Use the same procedure for the other rear No. 1 seat outer lap belt anchor cover.



24. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK


    B181695
  1. Remove the No. 1 luggage compartment trim hook by turning it clockwise.

    HINT:
    Use the same procedure for the other No. 1 luggage compartment trim hook.



25. REMOVE FRONT DECK SIDE TRIM COVER RH


    B240051E01
  1. Using a screwdriver, detach the 2 claws to remove the front deck side trim cover LH.
    Text in Illustration 
    *1
    Protective Tape

    HINT:
    Tape the screwdriver tip before use.



26. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM COVER


    B240048
  1. Detach the 2 claws to open the cover.



    B240049E01
  1. Remove the bolt, luggage hold belt striker and No. 2 luggage compartment trim cover.
    Text in Illustration 
    *1
    Luggage Hold Belt Striker

    HINT:
    Use the same procedure for the other No. 2 luggage compartment trim cover.



27. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH


  1. w/o Rear No. 2 Seat:



      B240057
    1. Remove the bolt to disconnect the rear No. 1 seat outer belt floor anchor.

    2. Remove the 3 bolts and screw.



    3. Detach the 7 clips, 5 claws and 2 guides.


      B240059

    4. Disconnect each connector.



    5. B238823
    6. Detach the 6 claws and 2 guides and pass the rear seatback lock control lever base through the deck trim side panel assembly RH to remove the deck trim side panel assembly RH.



  1. w/ Rear No. 2 Seat:



      B240057
    1. Remove the bolt and disconnect the rear No. 1 seat outer belt floor anchor.



    2. B240055
    3. Remove the bolt and disconnect the rear No. 2 seat outer belt floor anchor.

    4. Remove the 3 bolts and screw.

    5. Detach the 7 clips, 5 claws and 2 guides.



    6. Disconnect each connector and remove the deck trim side panel assembly RH.


      B240061



28. REMOVE REAR NO. 2 SEATBACK LOCK STRIKER SUB-ASSEMBLY RH


B238022
  1. Remove the 2 bolts.

  1. Detach the claw and remove the striker.

    NOTICE:
    Do not wipe off the grease on the sliding portion of the striker.



29. REMOVE REAR SEAT CUSHION LOCK STRIKER


B238023
  1. Remove the 2 bolts and striker.