Home › Vehicle Interior › INTERIOR PANELS / TRIM › INSTRUMENT PANEL SAFETY PAD

INSTRUMENT PANEL SAFETY PAD > DISASSEMBLY

for Preparation Click here



1. REMOVE NO. 1 HEATER TO REGISTER DUCT


    B239293
  1. Remove the 4 screws and No. 1 heater to register duct.



2. REMOVE NO. 2 HEATER TO REGISTER DUCT


    B239294
  1. Remove the 4 screws and No. 2 heater to register duct.



3. REMOVE NO. 1 SIDE DEFROSTER NOZZLE DUCT


    B239291
  1. Remove the screw.

  1. Detach the 2 claws to remove the No. 1 side defroster nozzle duct.



4. REMOVE NO. 2 SIDE DEFROSTER NOZZLE DUCT


    B239292
  1. Remove the screw.

  1. Detach the 2 claws to remove the No. 2 side defroster nozzle duct.



5. REMOVE NO. 3 HEATER TO REGISTER DUCT


    B239289
  1. Remove the 2 screws.

  1. Detach the claw to remove the No. 3 heater to register duct.



6. REMOVE DEFROSTER NOZZLE ASSEMBLY


    B239290
  1. Remove the 3 screws and defroster nozzle assembly.



7. REMOVE ACCESSORY METER ASSEMBLY


    B352352
  1. Remove the 2 screws.



    B352353
  1. Disconnect the connector to remove the accessory meter assembly as shown in the illustration.



8. REMOVE TELLTALE LIGHT ASSEMBLY


    B352350
  1. Pull the security indicator light assembly to detach the 4 claws on the backside of the security indicator light assembly.

  1. Disconnect the connector to remove the security indicator light assembly.



9. REMOVE NO. 2 INSTRUMENT PANEL WIRE
  1. Disconnect the connector.



  1. Detach the 17 clamps to remove the No. 2 instrument panel wire.


    B354454



10. REMOVE INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY


    B240173
  1. Remove the 2 screws.



    B240174E01
  1. Detach the 5 hooks (A).
    Text in Illustration 
    *a
    Hook A
    *b
    Hook B

  1. Detach the 5 hooks (B) and remove the instrument panel passenger airbag.



11. REMOVE AUTOMATIC LIGHT CONTROL SENSOR


B152660
  1. Disconnect the connector.

  1. Detach the 2 claws and remove the sensor.



12. REMOVE NAVIGATION ANTENNA ASSEMBLY (w/ Navigation System)


    B240372
  1. Detach the clamp.

  1. Remove the 2 screws and antenna.